Generally speaking, the classification of hotel room furniture is similar in terms of functional requirements and furniture composition. Relatively speaking, it is generally composed of the following furniture: hotel bed sets, dressing tables, bedside cabinets, luggage cabinets, television cabinets, leisure chairs, coffee table countertops, etc. Wardrobes are generally completed on-site by decoration companies. When designing the material structure of the hotel furniture's guest rooms, we can focus on the following aspects
(1) The structural strength of guest room furniture is mostly fixed furniture, usually with a panel structure as the main type, using wood screws, hardware connectors, and adhesives as the bonding method. When using materials, attention should be paid to different material properties. For example, particle board and MDF have poor nail holding force. It should not be used in places that need frequent activities or strong nail holding force, such as door hinge screw parts, rail extraction bottom rail screw parts, which are easy to loose and produce sound. The hardware hanging parts on the bed screen and mirror frame wall should not be neglected or reinforced with wood. Currently, a 45 degree inverted wooden structure is popular.
(2) Appearance quality: The first requirement for appearance quality is for furniture countertops to be flat, with fine workmanship, delicate decoration, and clear and beautiful textures. Guestroom furniture usually uses particle board, medium density fiberboard, blockboard, laminated board and other materials as base materials, and uses thin wood, wood veneer and plywood as cladding materials. Different substrates and cladding materials have different material properties. Failure to pay attention to the material properties and correct usage often leads to warping of the panel. Shanghai Xueqin Furniture Factory suggests that the structural properties of the cladding materials on the back and front of the panel must be the same or similar, and the moisture content of the substrate is generally required to be 6-10%. The materials used should be of the same batch as much as possible. Try to shorten the time between loading and pressing in the workshop processing. Different materials have different properties and moisture content of the covering materials, and pay attention to different coating thicknesses, pressing time, and pressure.
(3) In the case of efficient production of the same material cost, which material is easy to process and which process can save process costs and improve efficiency, especially in vertical milling, router milling, and carving processes, which material is easy to process and cut, and is easy to be smooth and tidy. (4) When the material cost also meets the usage requirements, try to use low-cost materials as much as possible. When using large surface materials, pay attention to the use of the same small materials, and comprehensively improve the utilization rate of the board. Guestroom furniture is generally in large quantities, and it is recommended to use computers for reasonable layout. Large and small pieces of furniture should be comprehensively utilized to reduce material costs. Pay attention to the comparison of material costs for different structures.
(5) Generally, hotels do not have clear regulations on the amount of formaldehyde free, but there are fire protection requirements for furniture. If allowed by the hotel, certain parts can use fireproof boards, anti scald paint, flame retardant fabrics, etc. Upscale hotels even require the wood used to make furniture to undergo fire protection treatment\\\\ The floors of transportation and installation hotels are generally high, requiring furniture to be lightweight and easy to transport. There are some connected bed backs and some extended desks that cannot be transported by elevators. Goods elevators are usually removed during furniture installation. How to safely transport them depends on the material weight and structure. The above factors need to be comprehensively considered for cross application in practical applications. The functional requirements of hotel furniture require that the design details have an interactive relationship with the reasonable material structure and workshop process arrangement of the hotel furniture company. Shanghai Xueqin Furniture Factory suggests that the guest room furniture produced should not only meet the hotel's requirements, but also be able to produce efficiently and reduce costs. Professional processing techniques and equipment should be used, Make the furniture produced meet the comfort requirements of high-end hotels that are people-oriented.